Bridge & Highway LED Street Light
High-vibration resistant commercial roadway luminaire engineered for long-span bridges, elevated flyovers, and heavy-traffic municipal expressways. Built with reinforced ADC12 die-cast aluminum housing, Lumileds/Hongli 5050 optical engines delivering up to 150 lm/W, toolless forward-opening buckle maintenance, and IP66 watertight sealing.
Engineering & Structural Advantages
Vibration-proof die-cast chassis, forward-opening maintenance access, and matrix convective cooling.
High-Lumen 5050 Optical Engine (150 lm/W)
Equipped with high-output Lumileds / Hongli 5050 LED packages paired with UV-stabilized PC lens arrays, delivering 150 lm/W system efficacy with high roadway uniformity and minimal glare on elevated highway corridors.
- Type I, II, III, and IV symmetrical/asymmetrical roadway distribution profiles.
- Available in 2700K to 6500K CCT with Ra > 70 color rendering index.
- High pavement luminance uniformity minimizing dark patches across multi-lane bridge decks.
Toolless Forward-Opening Buckle Maintenance
Features an integrated die-cast pivoting axle with manual shell latches allowing the upper housing to pivot forward smoothly, providing immediate top-down access to internal drivers, SPDs, and terminal blocks.
- Quick-release manual latches allow rapid servicing without specialized tools.
- Auto-disconnect safety mechanism available during lid opening.
- Maximizes aerial maintenance safety and drastically reduces long-term lane closure times.
Four Scalable Die-Cast Sizes (30W to 400W)
The PE-6022 series offers four distinct ADC12 die-cast aluminum chassis dimensions engineered for project-wide versatility from ramp access to heavy highway transit:
- Size 1 (30W / 50W / 60W): 475 × 205 × 105 mm for bridge pedestrian paths, ramps, and perimeter lanes.
- Size 2 (80W / 100W / 120W): 545 × 245 × 105 mm for secondary bridge decks and overpass approaches.
- Size 3 (150W / 180W / 200W): 615 × 285 × 105 mm for main elevated expressways and multi-lane causeways.
- Size 4 (240W / 300W / 400W): 755 × 365 × 105 mm for long-span suspension bridges and high-mast interchanges.
Matrix Convective Heat Sink & Smart Photocell
Engineered with rear matrix thermal slots that promote continuous vertical airflow across the die-cast body, accelerating heat dissipation away from LED junctions while preventing dust and rainwater accumulation.
- ADC12 die-cast aluminum construction with multi-stage outdoor powder coating.
- Optional top-mounted NEMA/Zhaga photocell socket for automated dusk-to-dawn switching.
- Built-in 10kV / 20kV surge protection device (SPD) protecting against power line transients.
Anti-Vibration Tenon & Universal Mounting
Built with a reinforced die-cast tenon spigot and multi-bolt clamping structure designed to withstand severe mechanical vibrations from heavy freight traffic and high wind load on bridges.
- Compatible with standard Φ60mm cantilever arms and vertical post-top tenons.
- Stainless steel locking fasteners prevent loosening under continuous vibration.
- Operating temperature range: -40°C to +45°C across all outdoor environments.
Recommended Road Applications
Heavy-duty photometric configurations engineered for multi-lane bridge decks, expressways, and high-vibration infrastructure.
Bridges & Flyovers
High-power 200W–400W configuration delivering high-flux forward projection and robust vibration resistance on elevated transit decks.
Municipal Main Boulevards
Mid-to-high wattage (150W–200W) uniform illumination meeting strict national municipal roadway luminance standards.
Highways & Interchange Ramps
Aerodynamic die-cast housing with low wind resistance coefficient ensuring steady performance under severe gale conditions.
Coastal Causeways & Ports
Multi-stage anti-corrosion powder coating resisting high humidity, marine salt spray, and extreme temperature swings.
Need IES Photometric Files, Dialux Simulations, or Project Quotations?
Provide your road width, pole height, and required illuminance level. Our engineering team delivers full photometric reports and project pricing within 24 hours.